ATTENTION: DO NOT PUBLISH.

This device is undocumented, it’s an upcoming project that seems to be frozen. The only thing we have is a schematic in https://www.dropbox.com/home/Dokumenty/Dokumentacja/Conclusive/devcable and a physical device somewhere in the warehouse.

Below info is correct, but device-specific. Each device exposes different subset of features from the ones listed below.

Use the “mini-dev cable” instead - but it’s basically a simple breakout board for the high-density connector we’re using.

Introduction

Conclusive Developer Cable is a swiss army knife for development using Conclusive boards. It provides access to the system console UART, JTAG port, primary I2C bus and up to 4 board-specific GPIO signals using a single 20-pin ribbon cable. It connects to the host computer using a single USB 2.0 port.

Hardware specification

Pinout

...